User`s manual

86
rapid-dual-homing port fa3,fa5-6
set Rapid Dual Homing port success.
Note: auto-detect is recommended for dual Homing..
Ring Info
Ring Info
Switch# show multiple-super-ring [Ring ID]
[Ring1] Ring1
Current Status : Disabled
Role : Disabled
Ring Status : Abnormal
Ring Manager : 0000.0000.0000
Blocking Port : N/A
Giga Copper : N/A
Configuration :
Version : Rapid Super Ring
Priority : 128
Ring Port : fa1, fa2
Path Cost : 100, 200
Dual-Homing II : Disabled
Statistics :
Watchdog sent 0, received 0, missed
0
Link Up sent 0, received 0
Link Down sent 0, received 0
Role Transition count 0
Ring State Transition count 1
Ring ID is optional. If the ring ID is typed, this
command will only display the information of the
target Ring.
Loop Protect
loop-protect
Ethernet loop protection
Switch(config)# loop-protect shows parameters of
loop protect
enable Enable loop protection
disable Disable loop protection
transmit-interval Set the transmission frequency
of loop protection in seconds
Switch(config)# loop-protect enable all