User`s manual

80
in global settings listed in above.
Port Configuration Mode
Port Configuraiton
Switch(config)# interface fa1
Switch(config-if)# spanning-tree
bpdufilter a secure BPDU process on edge-port
interfcae
bpduguard a secure response to invalid
configurations(received BPDU sent by self)
cost change an interafce's spanning-tree
port path cost
edge-port interface attached to a LAN segment
that is at the end of a bridged LAN or to an end node
link-type the link type for the Rapid Spanning
Tree
mst the multiple spanning-tree
port-priority the spanning tree port priority
Port Path Cost
Switch(config-if)# spanning-tree cost
<1-200000000> 16-bit based value range from
1-65535, 32-bit based value range
from 1-200,000,000
Switch(config-if)# spanning-tree cost 200000
Port Priority
Switch(config-if)# spanning-tree port-priority
<0-240> Number from 0 to 240, in multiple of 16
Switch(config-if)# spanning-tree port-priority 128
Link Type - Auto
Switch(config-if)# spanning-tree link-type auto
Link Type - P2P
Switch(config-if)# spanning-tree link-type
point-to-point
Link Type – Share
Switch(config-if)# spanning-tree link-type shared
Edge Port
Switch(config-if)# spanning-tree edge-port enable
Switch(config-if)# spanning-tree edge-port disable
MSTP Port
Configuration
Switch(config-if)# spanning-tree mst MSTMAP cost
<1-200000000> the value of mst instance port cost
Switch(config-if)# spanning-tree mst MSTMAP
port-priority
<0-240> the value of mst instance port priority in
multiple of 16
Global Information
Active Information
Switch# show spanning-tree active