User`s manual

73
The most common industrial network redundancy is to form a ring or loop.
Typically, the managed switches are connected in series and the last switch is
connected back to the first one.
The Multiple Super Ring has enhanced Ring Master selection and faster recovery
time. It is also enhanced for more complex ring application.
Multiple Super Ring (MSR) technology have a fast restore and failover time in the
world, 0 ms for restore and less than 300 ms for failover. Advanced Rapid Dual
Homing (RDH) technology also facilitates Managed Switch to connect with a core
managed switch easily and conveniently. With RDH technology, you can also
couple several Rapid Super Rings or RSTP cloud together, which is also known as
Auto Ring Coupling.
TrunkRing technology allows integrate MSR with LACP/Port Trunking. The
LACP/Trunk aggregated ports is a virtual interface and it can work as the Ring port
of the MSR.
MultiRing is an outstanding technology Korenix can support. Multiple rings can
be aggregated within one switch by using different Ring ID. The maximum Ring
number one switch can support is half of total port volume. For example, the
Switch is a 7+3G port design, that means maximum 5 Rings (4 x 100M Rings and 1
Gigabit Rings) can be aggregated to one &+3G Switch. The feature saves much
effort when constructing complex network architecture.
New Ring: To create a Rapid Super Ring, just fill in the Ring ID which has range
from 0 to 31. If the name field is left blank, the name of this ring will be
automatically naming with Ring ID.
Ring Configuration
ID: Once a Ring is created, this appears and can not be changed.