User`s manual

1 Introduction

Welcome to Westermo i-line MDI-110 Series User Manual. Following topics are

covered in this chapter:

1.1 Overview

1.2 Major Features

1.3 Package Checklist

1.1 Overview

MDI-110 series, Industrial 10-port Managed Ethernet Switches, have 7

10/100Base-TX ports and 3 combo ports, 10/100/1000 RJ-45 / 100-FX / Gigabit

SX/LX for MDI-110-F3G and 10/100 RJ-45 / 100-FX SX/LX for MDI-110-F3.

MDI-110 is especially designed to operate under harsh environmental

conditions. The switches provide solid foundation for a highly fault-tolerant

and easily-managed network. MDI-110 can be remotely configured by Telnet,

Web browser, WeDashboard and managed by Simple Network Management

Protocol (SNMP) and Remote Monitoring (RMON). You can also connect the

attached RS232 console cable to manage the switch via a Command Line

Interface (CLI). CLI commands are Cisco-like commands, your engineers who

are familiar with Cisco products don’t need to learn new rules for CLI

commands.

Security is enhanced with advanced features such as 802.1Q VLAN and Port/IP

security. Performance is optimized by QoS and IGMP Snooping/Query.

Westermo ring technology, Multiple Super Ring, enables superb self-healing

capability for network failure. This is Westermo patented ring technology,

which is registered in most countries. For interoperability with your existed

network, MDI-110 series also come with an advanced redundant network

solution, Ring Coupling and Rapid Dual Homing technology. With Ring Coupling

and Rapid Dual Homing technology, Ethernet Ring can be extended more easily.

No matter which Westermo switch or other managed switches.

The IP31-designed aluminum case further strengthens MDI-110's withstand

ability in harsh industrial environment. The event warning is notified to the

network administrator via e-mail, system log, or to field engineers by relay

output. MDI-110 Series Industrial Managed Ethernet Switch has also passed

CE/ FCC/ UL safety certifications to help ensure safe and reliable data

transmission for industrial applications