User`s manual

Type: Static or LACP set up in Aggregation Setting.

Aggregated: When the LACP links is up, you can see the member ports in

Aggregated column.

Individual: When LACP is enabled, member ports of LACP group which are not

connected to correct LACP member ports will be displayed in the Individual

column.

Link Down: When LACP is enabled, member ports of LACP group which are not

linked up will be displayed in the Link Down column.

4.3.5 Command Lines for Port Configuration

Feature

Command Line

Port Control

Port Control –

State

Switch(config-if)# shutdown -> Disable port state

Port1 Link Change to DOWN

interface fastethernet1 is shutdown now.

Switch(config-if)# no shutdown -> Enable port state

Port1 Link Change to DOWN

Port1 Link Change to UP

interface fastethernet1 is up now.

Switch(config-if)# Port1 Link Change to UP

Switch(config)# sfp

ddm Digital diagnostic and monitoring

eject Eject SFP

scan Scan SFP

Switch(config)# sfp ddm

enable Enable DDM

disable Disable DDM

Switch(config)# sfp ddm disable all  disable SFP DDM

function on all SFP port

Switch(config)# sfp eject all  eject all SFP transceiver

Example: Switch(config)# sfp eject all

SFP on Port 9 normally ejected.

SFP on Port 10 normally ejected.

All DDM SFP normally ejected.