User`s manual

46
System Reboot allows you to reboot the device. Some of the feature changes
require you to reboot the system. Click on Reboot to reboot your device.
Note: Remember to click on Save button to save your settings. Otherwise, the
settings you made will be gone when the switch is powered off.
Pop-up alert screen to request confirmation. Click on Yes. Then the switch will be
rebooted immediately.
Pop-up message screen appears when rebooting the switch..
4.2.10 CLI Commands for Basic Setting
Feature
Command Line
Switch Setting
System Name
Switch(config)# hostname
WORD Network name of this system
Switch(config)# hostname SWITCH
SWITCH(config)#
System Location
SWITCH(config)# snmp-server location Sweden
System Contact
SWITCH(config)# snmp-server contact
[e-mail]
Display
SWITCH# show snmp-server name
SWITCH
SWITCH# show snmp-server location
Sweden
SWITCH# show snmp-server contact