User`s manual

35
The system will update IPv6 Neighbor Table automatically, and user also can click
the icon “Reload” to refresh the table.
4.2.4 Time Setting
Time Setting source allow user to set the time manually or via a NTP server.
Network
Time Protocol (NTP) is used to synchronize computer clocks in a Network. You
can configure NTP settings here to synchronize the clocks of several switches on
the network.
It also provides Daylight Saving Time function.
Manual Setting: User can select Manual setting to change time as user wants.
User can click the button “Get Time from PC” to get PC’s time setting for switch.
NTP client: Set Time Setting Source to NTP client to enable the NTP client service.
NTP client will be automatically enabled if you change Time source to NTP Client.
The system will send requests to acquire current time from the configured NTP
server.
Time-zone: Select the time zone where the switch is located. Following table lists
the time zones for different locations for your reference. The default time zone is