User`s manual

34
fe80::207:7cff:fe60:0.
IPv6 Address field: typing new IPv6 address in this field.
Prefix: the size of subnet or network, and it equivalent to the subnet mask, but
written in different. The default subnet mask length is 64bits, and written in
decimal value -64.
Add: after add new IPv6 address and prefix, don’t forget click icon-“Add” to apply
new address to system.
Remove: select existed IPv6 address and click icon-“Remove” to delete IP
address.
Reload: refresh and reload IPv6 address listing.
IPv6 Default Gateway: assign the IPv6 default gateway here. Type IPv6 address of
the gateway then click “Apply”. Note: In CLI, we user ::/0 to represent for the IPv6
default gateway.
IPv6Neighbor Table: shows the IPv6 address of neighbor, connected interface,
MAC address of remote IPv6 device, and current state of neighbor device.