User`s manual

21
Click on Enter or OK. The Welcome page of the web-based management
interface will then appear.
Once you enter the web-based management interface, you can freely change
the IP address to fit your network environment.
Note 1: Internet Explorer (IE) 5.0 or later versions do not allow Java applets to
open sockets by default. Users have to directly modify the browser settings to
selectively enable Java applets to use network ports.
Note 2: The Web UI connection session will be logged out automatically if you
don’t give any input after 30 seconds. After logged out, you should re-login and
type in the correct user name and password again.
3.2.2 Secured Web Interface
Westermo web management page also provides secured management HTTPS
login. All the configuration commands will be secured.
Launch the web browser and log in.
1. Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
2. Type https://192.168.2.200 (or the IP address of the switch). And then
press Enter.
3. The popup screen will appear and request you to trust the secured HTTPS
connection. Press Yes to trust it.
4. The login screen will appear next.