User`s manual

141
Field
Description
SMTP Server IP Address
Enter the IP address of the email Server
Authentication
Click on check box to enable password
User Name
Enter email Account name (Max.40 characters)
Password
Enter the password of the email account
Confirm Password
Re-type the password of the email account
You can set up to 4 email addresses to receive email alarm from the switch
Rcpt E-mail Address 1
The first email address to receive email alert from
the switch (Max. 40 characters)
Rcpt E-mail Address 2
The second email address to receive email alert
from the switch (Max. 40 characters)
Rcpt E-mail Address 3
The third email address to receive email alert from
the switch (Max. 40 characters)
Rcpt E-mail Address 4
The fourth email address to receive email alert from
the switch (Max. 40 characters)
Once you finish configuring the settings, click on Apply to apply your
configuration.
4.11.5 CLI Commands
Command Lines of the Warning configuration
Feature
Command Line
Relay Output
Relay Output
Switch(config)# relay 1
di DI state
dry dry output
ping ping failure
port port link failure
power power failure
ring super ring failure
Note: Select Relay 1 or 2 first, then select the
event types.
DI State
Switch(config)# relay 1 di
<1-2> DI number
Switch(config)# relay 1 di 1