User guide

12
6622-2231 • 29000448
DR-260
DSL Router
SIM 1
SIM 2
PWR
0 WLAN DTE DSL1 2 3 NET SIMDAT
3G/GPRS
LAN
SIGNAL
DB1B2
OH CD DAT
ISDN
PSTN
SIM Card Sockets
The two sockets at the left side of the front panel are for the GSM SIM card(s)
that you will receive from your service providers. SIM 1 and SIM 2
cannot be used to access two networks simultaneously.
The SIM card(s) should be inserted into SIM cardholders on the
right of the front panel as illustrated below.
In both cases, the end of the SIM card with the chamfered corner
should be inserted first. For SIM 1 the contacts should be face
down. For SIM 2 the contacts should be face up.
Antenna
interface
(optional)
Connections
Power interface cord
Cable Description
Black – VDC
Red + VDC
DSL interface
Ethernet interface
USB Host Connectors
LED Indicators
(for details
see next page)
RS-232 Interface
25-position Direction Description
No. 2 In Transmit Data (TD)
No. 3 Out Receive Data (RD)
No. 4 In Request To Send (RTS )
No. 5 Out Clear To Send (CTS)
No. 6 Out Data Set Ready (DSR)
No. 7 Not connected Signal ground (SG)
No. 8 Out Data Carrier Detect (DCD) )
No. 15 Out Transmitter Clock (TxC)
No. 17 Out Receiver Clock (RxC)
No. 20 In Data Terminal Ready (DTR)
No. 22 Out Ring Indicate (RI)
No. 24 In External Transmitter Clock (ETC)
Antenna interface
(optional)