User's Guide

Ibex-RT-310 and Ibex-RT-320 Series User Guide
Westermo Network Technologies 25
NOTICE
To avoid damages on the Ethernet interfaces, ensure that the far end side of the
Ethernet cable shield itself is connected to protective earth.
Antenna WLAN (A1
, A2
)
Connector
QMA
female
Direction
Transmit and receive
Cabling
50
-
ohm coaxial cable
and WLAN antenna
required
Conductive chassis
Yes
WLAN interface
High power
3x3
MIMO 802.11n Access Point / Client
WLAN frequency
bands
2.400
to
2.4835 GHz,
4
.
940 to 4
.
990 GHz,
5.150
to
5.350 GHz, 5.470
to
5.725 GHz, 5.725 to 5.850 GHz
Transmitting power
Ibex-RT-310
Max. conducted
combined
transmit power within the whole
frequency range:
802.11b/g/n, up to +18dBm for all data rates
802.11a/n, up to +18dBm for all data rates
Transmitting power
Ibex-RT-320
Max. conducted
co
mbined
transmit power within the whole
frequency range:
802.11b/g/n, up to +27dBm for all data rates
802.11a/n, up to +27dBm for all data rates
Table 13 Antenna Port Specification
NOTICE
Depending on the installation country there are frequency/band restrictions and
output power limitations.
NOTICE
Unused antenna port must be terminated with 50-Ohm terminations.
NOTICE
To avoid damages on the antenna interfaces, ensure that the far end side of the
antenna cable and/or the antenna itself is connected to protective earth.