Operator`s manual

Load
4-Pole Frequency Generator Voltage
Applied
Speed (rpm) (Hertz) 120V (110)
240V (220)
Plants Plants
None 1830 62
122 240
(1530) (52) (112)
(224)
Half
1800 60 120 240
(1500)
(50) (110)
(220)
Full 1755
59
110 220
(1455) (49) (100) (200)
The output voltage should
be checked periodically to ensure proper operation of the generating plant and
the appliances it supplies.
If an
AC voltmeter or ampmeter is not installed to monitor voltage and load, check it with a portable
meter and amp-probe.
Preventive Maintenance (Generator)
Maintenance on the generator is minimal.
1. Keep the generator clean, dry and well-ventilated.
2. Ensure that all connections are clean and tight and that cables carrying AC voltage are properly
supported and protected against chafing.
3. The rear armature bearing is lubricated and sealed; therefore, no maintenance is required. If the
bearing becomes rough or noisy, replace
it.
Generator Troubleshooting
A complete and illustrated text on troubleshooting the
BID series of generators is furnished in the
Technical Manual which is available through your local dealer.
WESTERBEKE GENERATORS 74