Operator`s manual

NOTE: We recommend that the installer provide AC ampmeters (optional) so that the
operator can observe the load being taken off each leg of the generator.
A circuit breaker should be installed between the generator and the AC load. This circuit breaker should
be rated for the generator's AC output and be able to react quickly to overloads, subject to motor starting
considerations.
120V 60Hz 1201240V 60Hz
50}+-
2 5
Os
Os 7lUl-i-...,
03
H
110V 50Hz
110/22BV 50Hz 22BV 50Hz
02
sO
50 sO
'1
r
OS
7P Os
¥3
80
Q3
8 Q
I
I
I
H
l 1
l 2
AC Voltage Connections (6 Stud Terminal Block)
(Used with the BTD 100KW, 11.0KW, and the 12.5KW(A) (Generator Sets.)
NOTE: The frame ground wire must be moved when changing from 110 Volts, 50
Hertz to 220 Volts, 50 Hertz.
For making connections to the AC terminal block, use 1/4 inch terminal ends that will accept multi-strand
wire sized for the number of conductors in the bundle, the rating of the conductor's insulation, and
amperage that will be drawn through the conductor(s). (Refer to the generator's scarlet and gold data
plate for generator amperage ratings.
65 WESTERBEKE GENERATORS