Operator`s manual

Cylinder head bolt
TORQUE SPECIFICATIONS
(M10)
(M12)
50.7 - 57.9
79.6 - 86.8
7.0 - 8.0
11.0-120
(See the" Torquing Cylinder Head Bolts" section of this manual on page 85.)
Crankshaft pulley nut
108.5 -180.8 20.0 - 25.0
Main bearing
cap bolt
36.2 - 43.4 5.0 - 5.5
Connecting rod
cap nut
23.1 - 25.3
3.2 - 3.5
Flywheel bolt - WITh separate washers
83.2 - 90.4 11.5 - 12.5
Flywheel bolt - washer attached
95.0 -100.0 13.0 -14.0
Oil pan drain plug
36.2 - 43.4 5.0 - 6.0
Oil filter
8.0 - 9.4
1.1 -1.3
(or tighten firmly by hand)
Delivery valve holder (injection pump) 28.9 - 36.2 4.0 - 5.0
Nozzle mounting bolt 10.8 -14.5 1.5 - 2.0
Nozzle holder
and retaining nut 43.4 - 57.9 6.0 - 8.0
Glow plug
10.8 -14.5 1.5 - 2.0
* NOTE: M8 indicates Metric, 8 mm thread diameter
Westerbeke
Diesel Engines
94