Operator`s manual

Problem
START switch is de-
pressed:
no starter
engagement.
Engine cranks,
but does not start.
Failure
to stop.
Weslerbeke Diesel Engines
probable Cause
1. Connection to starter
solenoid faulty.
2. F aully START switch.
3. Faulty solenoid.
4. Loose battery
connection.
5. Low batteries.
1. Shut-off valve at
fuel tank.
2. Faulty fueling system.
3. Air is in the fuel
system.
4. Fuel pump is not
operating.
5. Fuellilters are clogged.
1. Mechanical Run
linkage is
disconnected.
80
Verification/Remedy
1. Check connection S at the
starter solenoid for 12
volts
with the SWITch depressed.
2. Check switch with an
ohmmeter.
3. Twelve volts is present
at the
S terminal of the
starter
solenoid.
4. Check battery connections
at both the
+ and - ground.
5. Check battery charge state.
Low voltage at the
solenoid's
S
terminal with no activation.
1. Return shut-off valve
to
ITS ON pOSITion. Now bleed
the fuel system.
2. Check for fuel
to engine.
3. Bleed the fuel system.
Locate the
leak and correct
ff.
4. Check pump operation.
Check
for 12-Volts at pump.
5. Clean/replace fillers.
1 .
Stop engine by man-
ually moving the
RUN linkage to STOP.
That failing,
shut
OFF fuel and air.