Operator`s manual

NOTE: An alarm buzzer is supplied with every Admiral Panel. The installer is responsible for
electrically connecting the buzzer to the four-pin connection on the engine's electrical har-
ness. The
installer is also responsible for installing the buzzer in a dry location so that it will
be
audible to the operator should it sound while the engine is running. The buzzer will sound
when
the ignition key is turned ON and should silence when the engine has started and when
the engine's oil pressure rises above 15 psi.
*5. Water Temperature Gauge: This gauge is graduated in degrees Fahrenheit and is
illuminated while the
Key
Switch is turned ON. The engine's normal operating temperature is 170 - 190° F (77 - 88°C).
*6. Oil Pressure Gauge: This gauge is graduated in pounds per square inch (PSI) and is illuminated while
the Key
Switch is turned ON. The engine's normal operating oil pressure ranges between 30 - 60 PSI.
*NOTE: When the engine is manually shut down, and the engine's Key Switch is turned OFF,
the water temperature gauge will continue to register the last temperature reading indicated
by the gauge before electrical power was turned OFF. The temperature gauge will once again
register the engine's true temperature once
electrical power is restored to the gauge. The oil
pressure gauge will
fall to zero when the engine is manually shut down.
Westerbeke Diesel Engines
38