Technical data

STD. REPAIR SERVICE
VALUE LIMIT LIMIT
Undersize finish dimensions
Journal W13 U.S. 0.25 58.695-58.710 mm
U.S. 0.50 58.445-58.460 mm
U.S. 0.75 58.195-58.210 mm
W21, W27 U.S. 0.25 51.735-51.750 mm
U.S. 0.50 51.485-51.500 mm
U.S. 0.75 51.235-51.250 mm
W33 U.S. 0.25 56.695-56.710 mm
U.S. 0.50 56.445-56.460 mm
U.S. 0.75 56.195-56.210 mm
Pin W13 U.S. 0.25 41.700-41.715 mm
U.S. 0.50 41.450-41.465 mm
U.S. 0.75 41.200-41.215 mm
W21, W27 U.S. 0.25 41.700-41.715 mm
U.S. 0.50 41.450-41.465 mm
U.S. 0.75 41.200-41.215 mm
W33 U.S. 0.25 47.735-47.750 mm
U.S. 0.50 47.485-47.500 mm
U.S. 0.75 47.235-47.250 mm
18. Main Bearing
Type Kelmet metal with back metal
(flanged metal for center bearing)
Oil clearance 0.10nn
Undersize U.S 0.25, 0.50, 0.75
19. Camshaft
Driving method Gear Drive
Clearance between journal and
cylinder block hole of bushing 0.15 mm
Cam lobe height (for both intake
and exhaust valves) 35.76 mm -1.0 mm
Camshaft bushing (when equipped with front bushing)
Type Lead bronze alloy with back metal