Technical data

6. OPERATION OF GEARBOX
Gear changing requires only minimum effort. The gearbox is suitable for single lever remote control.
Upon loosening the retaining screw, the actuating lever (see illustration) can be moved to any position
required for the control elements (cable or rod linkage). Make certain that the lever does not contact the
actuating lever cover plate (9): the minimum distance between lever and cover should be 0.5 mm.
The control cable or rod should be arranged at right angles to the actuating lever in the neutral
position of the lever.
A larger amount of lever travel is in no way detrimental.
However, if the lever travel is shorter, proper gear engagement might be impeded which, in turn,
would mean premature wear, excessive heat generation and resulting damage.