Operator`s manual

FUEL SYSTEM
General
Fuel
Fuel Injection
Pump
Fuel Injection Timing
Nozzle
Injectors
Lift Pump
Fuel Filter (on engine)
Air
Cleaner
Air Flow (engine combustion)
COOLING SYSTEM
General
Operating Temperature
Fresh Water Pump
Sea Water Pump
Sea Water Flow, at 1800 rpm
(measured before discharging
into exhaust
elbow)
System
Capacity
LUBRICATION SYSTEM
General
Oil Filter
Sump
Capacity (includes filter)
SYSTEM SPECIFICATIONS
Open
flow, totally self-bleeding
No.2 Diesel oil (cetane rating of 45 or higher)
CAY DPA Injection pump
23
0
BTDC ± 0.5
0
(static timing)
Throttle type
Bosch type
12-Volt; lift capacity 6 ft (1.8 m)
Spin-on replaceable cartridge
Metal screen type - cleanable
67 cfm (1.89 cmm)
Fresh water-cooled
block
thermostatically-controlled
with heat exchanger
170
-190
0
F (77 - 88
0
C)
Centrifugal type, metal impeller, belt-driven
Positive displacement, rubber impeller, gear-driven
5.6 gallons per minute (21.2 Ipm)
10 qts (9.5 liters) approximate
Pressure type
by Trochoid pump
gear-driven with
external pressure relief valve
Full
flow, paper element, spin-on type #35828
7 qts (6.6
liters)
4