Operator`s manual

NOTE: We recommend that the installer provide AC ampmeters (optional) so that the operator
can observe the load being taken off each leg
of the generator.
A circuit breaker should be
installed between the generator and the AC load. This circuit breaker should be
rated
for the generator's AC output and be able to react quickly to overloads, subject to motor starting con-
siderations.
120V 60Hz 1281240V 60Hz
II
Os 7 (5
03 8
110V 50Hz 1101220V 50Hz
220V 50Hz
sO
sO
02
sO
II
Os 70)
II
AC Voltage Connections (6 Stud Terminal Block)
15.0KW Generator Set
NOTE:
The frame ground wire must be moved when changing from 110 Volts, 50 Hertz to
220 Volts, 50 Hertz.
For making connections
to the AC terminal block, use 1/4 inch terminal ends that will accept multi-strand
wire sized
for the number of conductors in the bundle, the rating of the conductor's insulation, and amperage
that will be drawn through the conductor(s). (Refer
to the generator's scarlet and gold data plate for gener-
ator amperage ratings.)
37