Cellular Specialties, Inc.
3. Inspection and Installation Inspection Inspect the equipment as soon as possible after purchase. If any part of the equipment has been damaged in transit, report the damage to the transportation company and also to the company where purchased. Contents The unit package contains the following: Model PCS2000 Mini-IBA Power Transformer, 110 volt to 5 volt User Manual Optional Accessories Accessories are available directly from Cellular Specialties, Inc. or any of CSI’s distributors.
If coordinates are not available, measure the RSSI at the external antenna output by connecting a phone to the external antenna and slowly rotating the antenna until a maximum reading is obtained. The Mini-IBA and interior antenna should be centrally located, keeping coaxial cable runs to a minimum. A maximum length of 100 feet of low loss cable is recommended. The actual coax used should be RG-8 type with a flame retardant rating as a minimum.
Safety Precautions CAUTION ! For INDOOR use, an Omni-Directional Antenna with a maximum gain of 8dBi is authorized for use with this unit. Inside antennas must be positioned to observe minimum separation of 20 cm. (~ 8 in.) from all users and bystanders. For the protection of personnel working in the vicinity of inside (downlink) antennas, the following guidelines for minimum distances between the human body and the antenna must be observed.
