User's Manual
Table Of Contents
- Table of Contents
- Product Registration Information
- Safety Guidelines
- Acronyms and Defi nitions
- Functional Overview
- Electrical Characteristics
- Mechanical Specifi cations
- AC Power Specifi cations
- Environmental Requirements
- Mechanical Drawing
- System Set-Up Considerations
- Wall Mounting
- Rack Mounting
- Optional Accessories
- Important Installation Notes
- Powering Up the Unit
- Local Communication Interface Ports
- USB Interface
- Ethernet
- Monitoring & Alarms
- Web based GUI Session
- User Maskable Alarms
- GPS Alarm
- Software Abort Alarm
- Software Error Alarm
- Property Failure Alarm
- Phase Lock Alarm
- FPGA Programming Alarm
- Hardware Control Alarm
- Text Menu Interface (Local Access)
- Telnet Session (Remote Access)
- Additional Tips
- Warranty
- Index
-25-
Set Parameters Menu
Once the maintenance mode login is performed successfully the main menu will be displayed again but without the “(Disabled)”
quali• er on the “Set Parameters” choice.
When “Set Parameters” is • rst selected the unit will ask for the maintenance mode login. (The default username for
the maintenance mode is “csi” and the password is “csi1234”.)
Upon successful login the unit displays the main menu.
Main Menu
Once the unit has completed its boot up and link initialization phases it will display the login prompt. The username is “user” and the
password is “csi1234”.
Login
User Interface