User's Manual
Table Of Contents
- Table of Contents
- Product Registration Information
- Safety Guidelines
- Acronyms and Defi nitions
- Functional Overview
- Electrical Characteristics
- Mechanical Specifi cations
- AC Power Specifi cations
- Environmental Requirements
- Mechanical Drawing
- System Set-Up Considerations
- Wall Mounting
- Rack Mounting
- Optional Accessories
- Important Installation Notes
- Powering Up the Unit
- Local Communication Interface Ports
- USB Interface
- Ethernet
- Monitoring & Alarms
- Web based GUI Session
- User Maskable Alarms
- GPS Alarm
- Software Abort Alarm
- Software Error Alarm
- Property Failure Alarm
- Phase Lock Alarm
- FPGA Programming Alarm
- Hardware Control Alarm
- Text Menu Interface (Local Access)
- Telnet Session (Remote Access)
- Additional Tips
- Warranty
- Index
-15-
Location Information
This page will allow the user to enter address information for the beacon and will display GPS coordinates.
If the beacon includes a modem kit, click on Remote Network in the navigation box and the screen above is displayed.
Highlight the carrier on whose network the repeater and modem will be con! gured and click the Change Settings button. Refer to the
documentation included with the modem kit for additional information on con! guring the modem.
Remote Network