Installation Instructions

Installation and Operator Handbook Installation Instructions
AMX–MA–00653 Issue 0.03 (USA) 2
3 INSTALLATION INSTRUCTIONS
3.1 GENERAL
This chapter provides a detailed description of the installation procedure for the DRB-25 Dual Channel Radio
System and should be read before starting the installation. Use the Installation Instructions in conjunction
with the configuration checklist for the specific system being installed.
3.2 SAFETY PRECAUTIONS
Observe standard safety procedures for the handling of electronic equipment:
WARNING
FOLLOW CORRECT LIFTING PROCEDURES FOR HEAVY
ELECTRONIC EQUIPMENT.
ATTE NTION
OB SERVE
PRECAUTIONS
F OR HANDLING
ELE CTROSTATIC
SENSITI VE
DEVICES
When removing or handling cards, use an anti-static wrist strap
connected to ground and always place the card on an anti-static mat
Handle modules by their edges and do not touch components or
connectors.
Avoid placing the DRB-25 near any source of excessive heat
Avoid placing the DRB-25 near a naked flame
Avoid placing the DRB-25 in a wet or damp location
Do not subject the DRB-25 to severe mechanical shock