Installation Instructions

Installation and Operator Handbook Installation Instructions
AMX–MA–00653 Issue 0.03 (USA) 15
To configure the pin allocation as either a console or exchange interface place the jumpers on connectors
XL5, XL6 (line 1) and XL3, XL4 (line 2) as follows:
Line 1 Line 2
Connectors XL5 & XL6 XL3 & XL4
Console configuration jumper position (default) pin 1- pin 2 pin 1- pin 2
Exchange configuration jumper position pin 2- pin 3 pin 2- pin 3
3.6.5.6 RS-485 serial data
Function: Provides vocoded voice for APCO Project 25 Fixed Station Interface (Ef) or for a digital
console interface. Future enhancement, software upgrade.
Located: Interface Module front panel
Label: LINK
Electrical: RS-485
Connector: DB9 (male)
Pin allocation:
Pin Function
1 Reserved
2 Transmit data + (out of IAC)
3 Transmit data - (out of IAC)
4 Reserved
5 Ground
6 Reserved
7 Receive data + (into IAC)
8 Receive data - (into IAC)
9 Reserved
3.6.5.7 Ethernet
Function: Network management interface and APCO Project 25 Data Host Interface (Ed) for packet
data.
Status: Future enhancement, software upgrade.
Located: Interface Module
Label: NET
Electrical: 10Base-T
Connector: RJ45