User Manual

Installation and Operator Handbook Programming and Configuration
AMX-MA-00657 Issue: 1.02 (USA) Page 18
5.4.3 Tone Remote Settings
Using the Tone Remote Properties the following functions may be allocated to tones used by industry
standard tone remote units:
• Increase audio level
• Decrease audio level
• Change to Tone Remote controlled channel
Selecting Program/Tone Remote Settings, the Tone Remote Settings Dialog Box will appear as shown in
Figure 5-8. This box lists the currently configured tone signals with their appropriate function.
Figure 5-8 Tone Remote Dialog Box
Add: When selected, the Tone Remote Properties appears as shown in Figure 5-9. Select a function tone
(F1 – F12). When assigning a function, the pull-down window lists the appropriate channels, (eg. Fixed
channels with Tone control are assigned as tone remote channels) and increase/decrease audio level
functions. Choose a function and click OK. The new function will now be displayed in the Tone Remote
Settings Dialog Box. Otherwise click CANCEL and the Tone Remote Settings will remain unchanged.
Edit: To edit a particular Tone Remote function from the Tone Remote Settings Dialog Box, either
highlight the appropriate function and click EDIT or simply double click the function. This will display
the Tone Remote Properties Dialog Box containing the functions current properties.
Delete: To delete a particular tone remote function, highlight the required function and click DELETE.
When satisfied with the tone remote function settings, click OK. Otherwise, click CANCEL to ignore
changes.