User Manual

Installation and Operator Handbook Programming and Configuration
AMX-MA-00657 Issue: 1.02 (USA) Page 11
5.4.2 Channel Table
To enter the Channel Table, from the main menu activate the Program pull-down menu and select
Channel Table. The Channel Table dialog box will appear as shown in Figure 5-5.
The table window lists the currently configured channels for the DMR-25 Transceiver. These channels are
sorted in ascending order of the channel number. Listed functions are:
Add: To add a new channel configuration, click ADD and the Channel Settings Dialog Box appears.
Delete: To delete a currently configured channel, highlight the desired channel (left mouse button click on
the channel name) and click DELETE. Several channels may be deleted in one operation, if required.
Copy: To copy a configured channel, highlight the desired channel (left mouse button click on the channel
name) and click COPY. The Copy Channel Dialog Box appears. Enter the new desired channel number
and click OK. If the desired channel number already exists, a new Copy Channel Dialog Box appears
asking if you want to replace the existing configured channel. Click YES to do so. At any stage click
CANCEL to exit the Copy Channel function and return to the Channel Table Dialog Box. The new
channel appears in the Channel Table Dialog Box.
Edit: To edit an existing channel, highlight the required channel (left mouse button click on the channel
name) and click EDIT or double click the left mouse button. The Channel Settings Dialog Box appears
and the channel parameters may be changed.
Close: This closes the Channel Table and returns to the Main Entry Screen of the DMR-25 Programmer.
Figure 5-5 Channel Table Dialog Box
To enter the Channel Settings, either Edit an existing channel or Add a channel from the Channel Table
Window. The Channel Settings dialog box will appear as shown in Figure 5-6.
The channel settings for the selected channel will be displayed in this dialog box.