User Guide- DMX dimmer
Connecting Flex Mats
Connecting a Flex Cine LED Mat
1. Ensure the dimmer is turned OFF.
2. Plug the Flex Cine mat’s TE-9 Pin connector into the TE-9 Pin receiver located on the top of the
Flex Cine Dimmer. The proper connection may require the connector to be turned until the pins
align and it easily inserts into the dimmer’s receiver.
3. Once connected, rotate the coupling ring ¾ clockwise on the cable connector to secure.
4. Connect the dimmer to a compatible power source. See the Power
section in this guide for compatibility and connecting details.
Connecting a Flex LED Legacy Mat
Original Flex mat owners can operate their original Flex LED mats with the Cine Wireless DMX Dimmer
when paired with a Legacy Adapter (sold separately). IMPORTANT: Legacy Adapters are mat specific. Do
not attempt to use the same legacy adapter for various Flex mat styles.
1. Ensure the dimmer is turned OFF.
2. Connect the adapters TE-9 Pin connector into the TE-9 Pin receiver on the dimmer, rotate the
coupling ring ¾ clockwise on the cable connector to secure.
3. Connect the Flex mat connector to the adapter.
4. Rotate the connector’s coupling ring clockwise to secure the connection.
5. Connect the dimmer to a compatible power source. See the Power section in this guide for
compatibility and connecting details.
Disconnecting a Flex Cine LED Mat
1. Ensure the dimmer is turned OFF.
2. Grasp the coupling ring and rotate counterclockwise ¾ turn.
3. Gently pull the cable connector straight out and away from the dimmer.
Disconnecting a Flex LED Legacy Mat
1. Ensure the dimmer is turned OFF.
2. Rotate the adapter’s coupling ring counterclockwise ¾ turn.
3. Gently pull the adapter straight out and away from the dimmer.
4. Disconnect the mat from the adapter.
Note: Never force entry or removal of the connectors.
9