User Guide- DMX dimmer
NOTE: Any changes to the WiFi module sections within these sections require the user to hit the “Apply”
button to confirm the changes (See
Image09: Apply
).
NOTE: Depending on the browser, the browser may state that the dimmer WiFi is “Rebooting.” The web
interface may NOT inform you the rebooting process is complete. The reboot process will be completed
after 10 seconds and the browser can be closed.
NOTE: You can confirm that any changes were successful by accessing the WiFi module via the
10.10.100.254 web address (For example: if the name of the dimmer was changed you can look for the
dimmer’s new name in the list of available networks.)
NOTE: The process of the WiFi-enabled device to locate the dimmer’s network could take up to 2
minutes. If the dimmer name isn’t listed in the list of available networks after 2 minutes, then power cycle
the unit and allow the dimmer time for the WiFi-enabled device to list the dimmer in the available
networks.
NOTE: In order to allow any of your multiple Westcott Units to function as a CLIENT or HOST unit, please
keep the “AP interface Settings” and “STA interface Settings” identical.
25