User Guide- DMX dimmer
6. This 2nd dimmer is now searching for HOST units within its WiFi range with identical WiFi settings
(See: “WiFi Settings” section)
7. Ensure the CLIENT dimmer has been set up and addressed as a DMX fixture within the app on
the WiFi device
8. When the CLIENT dimmer is connected and receiving a DMX signal from the HOST dimmer the
DMX indicator LED will illuminate (green)
9. Both dimmers can now be controlled from the control app
NOTE: Should you experience issues while setting up the HOST Dimmer, then ensure all additional
dimmers are in the OFF position, confirm the HOST Dimmer’s WiFi selector switch is in the HOST
position, press the white WiFi Link button for 3 seconds until the dimmer’s WiFi HOST indicator light is
green, and power cycle the dimmer OFF & ON. The HOST Dimmer’s WiFi network should be visible in
the mobile device’s network list which could take up to one minute to become visible.
22