User Guide- DMX dimmer
3. The DMX Dimmer screen will display the Westcott logo and current firmware version before
displaying the dimmer user interface (UI) for controlling the attached Flex mat.
4. From the Main Menu, select DMX(001)(Local).
5. Set Correct DMX Channel from 001-512 (DMX Address default is 001)
6. ▲ (Up) and ▼ (Down) Arrows Change the Numbers (0-5, 0-9, 0-9)
7. ▶ (Right) and ◀ (Left) Arrows Control the Position
8. Locate the WiFi Selector on side of DMX Dimmer.
9. Slide the WiFi Selector into HOST mode
10. PRESS and HOLD the white WIFI LINK button on the side of the dimmer for 3 seconds and
release
11. The WiFi HOST indicator LED on the front of the DMX Dimmer will illuminate [green]
12. Power cycle the dimmer by turning the unit OFF and ON.
13. Locate the WiFi settings on your mobile device.
14. Look for the name of your Wireless DMX Dimmer in the list of available networks, select the
dimmer’s WiFi network and input the password.
○ NOTE: A new dimmer will be named “Westcott Dimmer” and the password is “flexpanel.”
○ NOTE: The dimmer name could take up to 1 minute to be visible in the Network Settings.
Should the dimmer not appear, press the white WiFi LINK button for an additional 3
seconds.
15. Once connected, open the DMX over ArtNet control application (i.e. Luminair for iOS) on your
mobile device.
○ Note: Instructions on how the setup and control DMX Fixtures via mobile apps (i.e.
Luminair) can be located on the developer’s website.
16. Once the dimmer has been set up in the app, the DMX indicator light on the dimmer will
illuminate (green) once the app has established a connection to the dimmer and receiving data.
Note: The Cine Wireless DMX Dimmer could take up to 1 minute to be visible in the list of selectable WiFi
Networks.
Note: WiFi & DMX over ArtNet for the Flex Cine Dimmer have been tested on various iOS and Android
devices. Older devices and operating systems may have connectivity issues.
19