User Guide- DMX dimmer
Basic Operation, Switches & Controls
1. Once the preferred power supply is connected, locate the ON|OFF Power Switch located on the
rear top right of the dimmer. Turn the switch to the ON position.
2. The DMX Dimmer screen will display the Westcott logo and current firmware version before
displaying the dimmer user interface (UI) for controlling the attached Flex mat.
3. Once the main menu is visible on the screen, use the ▲ (Up) and ▼ (Down) buttons on the d-pad
to scroll through all menu options (additional menu options might be located off-screen). Menu
options may vary depending on the type of connected Flex mat and firmware version. Note: The
dimmer will restart to the screen last used
4. Once the desired menu option has the “>” symbol located next to it on the dimmer screen, press
the center OK button on the d-pad to confirm the menu selection, which will move to the next
screen.
5. Repeat Step 4 until the desired control screen is displayed.
6. At any time, return to previous dimmer control screen by holding
the OK button on the d-pad for 2 seconds.
On/Off Switch
Use this switch to power the dimmer on and off. When using the Flex Cine Wireless DMX Dimmer AC
Adapter, switching the dimmer to the OFF position will not turn off the AC adapter.
D-Pad Controls: Menu Screen
● The ▲ (Up) and ▼ (Down) buttons move the “>” symbol to the desired menu selection.
● The ► (Right) and ◄ (Left) buttons currently do not change the menu screen selections.
● The center OK button has 2 functions. Quick pressing the OK button confirms the selection.
Holding the OK button for 2 seconds goes to the previous screen.
D-Pad Controls: Mat Control Screen
● The ▲ (Up) and ▼ (Down) buttons move the “>” symbol to the attribute to change.
● The ► (Right) and ◄ (Left) buttons can be used to adjust the color temperature and/or intensity
(where applicable).
● The center OK button has 2 functions. Quick pressing the OK button confirms the selection.
Holding the OK button for 2 seconds goes to the previous screen.
10