Flex Cine Wireless DMX Dimmer User Manual V1.
Contents Contents 2 Introduction 4 Choose Between Wireless or Wired DMX 4 Dimmer Control Modes and Presets 4 V-Mount AC and DC Power Options 4 Cutting-Edge Technology 4 Durable Lightweight Enclosure 4 Included Components 5 Overview 5 Warnings 6 Updating Firmware 7 Important Firmware Notes 7 Powering the Wireless DMX Dimmer 8 Connecting Flex Mats 9 Connecting a Flex Cine LED Mat 9 Connecting a Flex LED Legacy Mat 9 Disconnecting a Flex Cine LED Mat 9 Disconnecting a Flex LED
Daylight (1Ch) Source Presets, Gels & User Saved Presets 14 15 Accessing & Adjusting 15 Source Presets Explained 15 Gel Presets 16 Accessing & Adjusting 16 User Defined Stored Presets 17 Accessing & Adjusting 17 DMX Operation: Addressing and Operation 18 Flex Mat Channel Requirements 18 Important DMX Addressing Information 18 DMX (Hardwired) Connection 18 DMX over ArtNET Connection 18 Example DMX Addressing Scenario: 20 WiFi Host/Client Operation 21 HOST Mode 21 CLIENT Mode 21
Introduction Thank you for purchasing a Westcott Flex Cine Wireless DMX Dimmer. The dimmer is able to operate all Flex Cine LED mats, including RGBW, bi-color, and daylight sizes 1' x 1' up to 2' x 2'. It’s also backward compatible with most original Flex mats with an optional TE-9 pin adapter. Features Choose Between Wireless or Wired DMX The dimmer is designed with DMX512 Input/Output 5-Pin Male/Female XLR and WiFi capability for controlling one or multiple dimmers via WiFi Host/Client Mode.
Included Components ● Flex Cine DMX Dimmer ● Flex Cine DMX Dimmer Case ● Flex Cine DMX Dimmer Lanyard Overview 5
Warnings ● Use only with the Westcott Flex Cine AC Adapter and compatible batteries ● Keep away from fire and water ● Do not submerge in water ● Do not attempt to open or modify ● Do not short AC Adapter terminals ● Do not alter or change V-Mount plate or pins ● Do not overtighten connections ● Do not overtighten mounting threads 6
Updating Firmware The Flex Cine Wireless DMX Dimmer is designed with a USB port (5V 1A) to allow for firmware updates. Future updates may result in modified menu options and layouts. 1. Visit https://www.fjwestcott.com/7580 and scroll to the Support section. Find and download the latest firmware ZIP file. 2. Unzip the file. Open the extracted folder. 3. Read the Changelog file. 4. Save the .BIN file to the root directory of a USB flash drive that’s been formatted using MS-DOS (FAT).
Powering the Wireless DMX Dimmer ● Flex Cine Mats require a Flex Cine Dimmer and power source for operation. ● Flex Cine RGBW Mats require a Flex Cine Wireless DMX Dimmer. DMX Dimmer AC Adapter or 26V V-Mount Battery All Flex Mats 14.4 or 14.8V V-Mount Battery 1' x 1' Daylight and 1' x 1' Bi-Color Mats Connecting V-Mount Power Source 1. Ensure the dimmer is turned off. 2. Slide the power source toward the bottom of the dimmer until it clicks into the locked position.
Connecting Flex Mats Connecting a Flex Cine LED Mat 1. Ensure the dimmer is turned OFF. 2. Plug the Flex Cine mat’s TE-9 Pin connector into the TE-9 Pin receiver located on the top of the Flex Cine Dimmer. The proper connection may require the connector to be turned until the pins align and it easily inserts into the dimmer’s receiver. 3. Once connected, rotate the coupling ring ¾ clockwise on the cable connector to secure. 4. Connect the dimmer to a compatible power source.
Basic Operation, Switches & Controls 1. Once the preferred power supply is connected, locate the ON|OFF Power Switch located on the rear top right of the dimmer. Turn the switch to the ON position. 2. The DMX Dimmer screen will display the Westcott logo and current firmware version before displaying the dimmer user interface (UI) for controlling the attached Flex mat. 3.
● PRESS and HOLD the ▲ (Up) arrow for 3 seconds, or until the screen reads Preset (Saved), to save the output settings.
Note: Menu items, order, and functionality may change with future firmware updates.
■ PRESS and HOLD the ▲ (Up) arrow for 3 seconds to save the desired settings as a custom preset.
■ ○ ● Flex Mat Type ● Remaining Battery Status (estimated) Adjustable Tuning Indicators for Color & Intensity ● R: 0-255 ● G: 0-255 ● B: 0-255 ● W: 0-255 ● I: 0-255 Menu & Mat Controls ■ ▲ (Up) and ▼ (Down) Arrows to select R, G, B, W, and I. ■ ▶ (Right) and ◀ (Left) Arrows control color mixing and intensity ■ PRESS and HOLD the ▲ (Up) arrow for 3 seconds to save the desired settings as a custom preset.
■ ▶ (Right) and ◀ (Left) Arrows control intensity (0-255) ■ Note: Daylight Mode does not allow users to save defined presets Note: Menu items, order, and functionality may change with future firmware updates. Source Presets, Gels & User Saved Presets The Westcott Flex Cine Wireless DMX Dimmer arrives pre-loaded with over 100 predefined gels and presets that are available when a Flex Cine RGBW mat is connected to the DMX Dimmer. Accessing, tuning, adjusting and saving these presets is simple and easy.
Source Presets Explained ● 2800K – Common household fixtures utilize tungsten bulbs operate at 2800K. Household fixtures include lamps, floodlights, accent lights, outdoor lights, and holiday lights. ● 3200K – Common color temperature used for photo and film light sources. ● 4700K – Very close to a warm fluorescent fixture and used when the green spectrum is not available in other fixtures besides the RGBW. ● 5600K – Commonly referred to as “daylight balanced” in the Kelvin Temperature scale.
*Note: The Gels menu option is ONLY selectable when a compatible Flex Cine RGBW mat is connected to the DMX Dimmer. If a Flex Cine RGBW mat is attached and the option is not selectable, press the dimmer POWER SWITCH to the OFF position. Power the dimmer back on by pressing the POWER SWITCH to the ON position. Note: Menu items, order, and functionality may change with future firmware updates.
DMX Operation: Addressing and Operation Flex Mat Channel Requirements ● Daylight Mode – 1 channel ● Gel Mode – 1 channel ● Source Presets – 1 channel ● Bi-Color Mode – 2 channels ● RGBW+I Mode – 5 channels Important DMX Addressing Information ● If more than one Flex Mat is set to the same DMX address, all Flex Mats addressed will function in unison from the same signal. Individual light control is not possible.
3. The DMX Dimmer screen will display the Westcott logo and current firmware version before displaying the dimmer user interface (UI) for controlling the attached Flex mat. 4. From the Main Menu, select DMX(001)(Local). 5. Set Correct DMX Channel from 001-512 (DMX Address default is 001) 6. ▲ (Up) and ▼ (Down) Arrows Change the Numbers (0-5, 0-9, 0-9) 7. ▶ (Right) and ◀ (Left) Arrows Control the Position 8. Locate the WiFi Selector on side of DMX Dimmer. 9. Slide the WiFi Selector into HOST mode 10.
Example DMX Addressing Scenario: When connecting two RGBW Flex Cine mats, one Daylight mat, and one Bi-Color mat, the following addresses would be entered into the controller, which would be controlling each Flex mat’s DMX Dimmer set to the corresponding DMX channel. (Please note that the starting channel, nor order, matter. For this example, we will start the first mat on DMX channel 001.
WiFi Host/Client Operation Setup Process Before setting up multiple HOST & CLIENT Dimmers, ensure that all dimmers are in the OFF position before setting up the HOST dimmer to ensure that the HOST dimmer is the only dimmer broadcasting a WiFi network. Once the HOST Dimmer has been setup, then use the CLIENT Mode instructions to connect the first CLIENT dimmer to the host. Repeat the CLIENT Mode instructions for all additional CLIENT Dimmers. HOST Mode 1.
6. This 2nd dimmer is now searching for HOST units within its WiFi range with identical WiFi settings (See: “WiFi Settings” section) 7. Ensure the CLIENT dimmer has been set up and addressed as a DMX fixture within the app on the WiFi device 8. When the CLIENT dimmer is connected and receiving a DMX signal from the HOST dimmer the DMX indicator LED will illuminate (green) 9.
WiFi Settings Step-by-Step 1. Ensure Steps 1-4 in Basic Operation section have been completed. 2. Move the WiFi Selector to the HOST position. 3. PRESS and HOLD the white WIFI LINK button on the side of the dimmer until the WiFi HOST indicator on the front of the DMX Dimmer illuminates [green]. 4. Power cycle the dimmer by turning the unit OFF, wait 3 seconds and turn the unit to the ON position. 5.
d. LAN Setup i. IP Address(Default DHCP Gateway): 10.10.100.254 ii. Subnet Mask: 255.255.255.0 iii. DHCP Type: Server 12. Next, select STA Interface Setting from the list of links on the left and ensure the following settings are selected (See I mage04: STA Interface Setting) : a. STA Interface Parameters i. AP’s SSID: Westcott Dimmer ii. MAC Address (Optional): [leave blank] iii. Security Mode: WPA2PSK iv. Encryption Type: AES v. Pass Phrase: flexpanel b. DHCP Mode i.
NOTE: Any changes to the WiFi module sections within these sections require the user to hit the “Apply” button to confirm the changes (See I mage09: Apply) . NOTE: Depending on the browser, the browser may state that the dimmer WiFi is “Rebooting.” The web interface may NOT inform you the rebooting process is complete. The reboot process will be completed after 10 seconds and the browser can be closed. NOTE: You can confirm that any changes were successful by accessing the WiFi module via the 10.10.100.
WiFi Setup Images Image01: WiFi Networks 26
Image02: Mode Selection 27
Image03: AP Interface Setting 28
Image04: STA Interface Setting 29
Image05: Application Setting 30
Image06: Device Management 31
Image07: Restart Module 32
Image08: Rebooting 33
Image09: Apply 34
TE-9 Pin Connector Diagram The Flex Cine Mat TE-9 Pin Connector diagram below is for owners who need to replace a damaged mat connector on set. Note: This diagram is for replacing the mat connector ONLY. Important: Replacing a Flex Cine Mat connector should only be completed by an experienced professional. Failure to use a pin extractor tool and/or re-assembling incorrectly will damage the Flex Cine Mat and void the Limited Lifetime Warranty.
V-Mount Plate Pin Data Important: Do not replace or alter the V-mount plate on the dimmer as it’s been specially designed to accept 14.4V-26V V-mount batteries. ● 14.4V-14.
Warranty Information Westcott’s warranty obligations for this product are limited to the following terms. The F.J. Westcott Co. (“Westcott”) warrants this Westcott branded product against defects in materials and workmanship under normal use for a period of ONE (1) YEAR from the date of retail purchase from Westcott or an authorized retailer by the original end-user purchaser (“Warranty Period”).
Legal Information Westcott products are made to the company’s traditionally high standards of quality and comply with all applicable government safety regulations and requirements. In an effort to provide the best quality products possible, we periodically make product modifications. Actual products may not be identical to items pictured. Made in the USA. ©F.J. Westcott Co. All rights reserved.
