QUICK START GUIDE
Overview USB-C Port Wireless Signal Indicator Battery Indicator* Group Indicator Channel Indicator (1-19) Descend/Ascend through options Set | Power Button Hinged 3.5mm Sync Plug On reverse side. *Visible while charging and low battery.
Charging 1. Locate the USB-C port on the FJ-XR. 2. Plug a compatible USB-A to USB-C cable into the FJ-XR. 3. Plug the opposing end of the cable into any USB-A 5V power source. 4. The estimated charging time is 60 minutes. 5. The FJ-XR is fully charged when the battery indicator stops blinking. Power • Power On: Long press and hold the Set | Power button for 3 seconds until the screen illuminates. • Power Off: Long press and hold the Set | Power button for 3 seconds until the screen turns off.
3.5mm Sync Port Mounting 1. Gently pull the silver hinged sync plug up from the FJ-XR body. Do not overextend. 2. While securely holding both sides of FJ-XR, gently insert the FJ-XR sync plug into any strobe/flash 3.5mm sync port. 3. Ensure the FJ-XR sync plug is fully inserted into the sync port. Do not force plug.
Selecting a Channel & Group 1. Select a channel value by quick pressing the Set | Power button from the Main Menu screen until the Channel [CH] icon and number begin to flash. 2. Quick press the “-” or “+” buttons repeatedly to change the value (1-19) to match the Channel number selected on the FJ-X2m Wireless Trigger. 3. Quick press the Set | Power button to confirm Channel value and initiate changing the Group [GR] value. 4.
Warning • • • • Keep away from fire, water, and moisture. Do not submerge in water. Avoid drastic temperature changes before, during, and/or after use. Do not attempt to modify any Westcott products. Contact Westcott for assistance. The maximum operating temperature is 32-104°F (0-40°C). View product warranty details at fjwestcott.com/warranty. Register your new FJ-XR at fjwestcott.com/register. In an effort to provide the best quality products possible, we periodically make modifications.
