(1) 18" Ring Light 1) Power Supply 1) Mobile Device Mount 1) Goose neck Arm with Thread (1) Swivel Mount with Thread 1) 5.
Only use with the included AC power supply and power cord. Only usa with NP-F Caries batteries of the same capacity (Voltage Range: Both batteries should java the same state of charge when mounted. Av old using a fully-charged battery and a partially depleted battery at the same time. * Always remove batteries during storage and/or transport to avoid accidental operation which may lead to overheating If In the travail case. Keep away from fire and water. Do not submerge In water.
AC Ring Light Operation 1. Ensure the Ring Light is OFF by moving the prows sartorial to the middle position [03. 2. Connect the included AC power supply and power cord, 3.Insert the AC power supply’s barrel plug Into the AC receptacle on the back of tha Ring Light. 4.Insert the parer cord Into a standard wall outlet. 5. Press the double-line side of the power selector when using the AC power supply to power ON.
Mode: Pressing the dimming knob down continuously will cycle the Ring Light through threat different modes: Light Output, Color Temperature, and Battery Status. s Light Output By def auk, the Ring Light will start in the Light Output Mode and the LED Indicator square next to the "BRT” will illuminate. While In Light Output Mode, tum the dimming nab to adjust the light output level from low (P-00) ta high (P-100). Color Temperature Press the dimming knob down to select Color Temperature Mode.
