Specification

INCLUDES:
1-1/2” Male Trap Adapter with Nut
2 x 1-1/2” Reducer Bushing
1-1/2” Nut with Top Hat Washer
Silicone grease packet
1-1/2 x 6” threaded Nipple
1-1/2 x 6” Flanged Nipple
6 ea. Stainless Steel Wood Screws
Pressure Testing Compression Plug
Dust Cover
TC3P
This IsIand Tub Drain Quickly
and easily installs free-stand-
ing bathtubs. Designed for
2 in. Sch. 40 PVC. TC3A is the
ABS version. Comes with 2 in.
x 1-1/2 in. reducer bushing for
1-1/2 in. drains.
Island Tub Drain for Free Standing Tub
Installation
1. Measure and dry  t all connections. Use tubing cutter
or hacksaw to cut tubes as required.
2. Drill 3-7/8 in. (98 mm) hole in  oor with a Hole Saw (Not
Included) in position of where tub should sit.
3. Fasten TC3 to  oor with #10 x 1-3/4” screws.
4. Connect drain assembly to desired P-trap under  oor.
5. Install  oor around TC3.
6. Install desired drain to bathtub and grease
selected over ow tube with silicone grease.
7. Place rubber gasket on tube and grease
exterior gasket.
8. Lower tub with installed tailpiece into the TC3 drain.

Summary of content (2 pages)