Owner`s manual

RIGblaster Nomic

Typical RIGblaster nomic USB station hookup diagram.

PTT CONTROL: Use either supplied DB9M to DB9F serial cable connected

between the RIGblaster’s serial port and the computer’s RS232 serial port. If the

computer doesn’t have a DB9 (9 pin) serial port, use the supplied USB to DB9

serial converter. (The USB converter cable requires a driver installation)

RECEIVE AUDIO: Supplied 3.5mm, 1/8” stereo

phone plug audio cord from radios speaker or

fixed level output to computer’s mic* input.

Note: This is only a sample station hookup diagram; what might be used for portable operation with a RIGblaster nomic.

A desktop computer would have similar connections with different sound card connections.

COMPUTER AUDIO MONITOR:

Connect computer headphones or

amplified computer speakers.

MICROPHONE TRANSMIT AUDIO &

PTT: Mic. cable supplied with RIGblaster

connects to radios mic. input.