Owner`s manual

Owner’s Manual
Typical RIGblaster nomic USB station hookup diagram.
PTT CONTROL: Use either supplied DB9M to DB9F serial cable connected
between the RIGblaster’s serial port and the computer’s RS232 serial port. If the
computer doesn’t have a DB9 (9 pin) serial port, use the supplied USB to DB9
serial converter. (The USB converter cable requires a driver installation)
Note: This is only a sample station hookup diagram; what might be used for portable operation with a RIGblaster nomic.
A desktop computer would have similar connections with different sound card connections.
TRANSMIT AUDIO: Supplied 3.5 mm, 1/8”
stereo phone plugaudio cord from computer’s
headphone* output to RIGblaster’s audio in.
* For desktop computers use the computer’s line
input in place of the mic. input and use the line output
in place of the headphone output.
7