Owner`s manual

RIGblaster plus
16
8 PIN SCREW ON MICROPHONE JUMPER DIAGRAMS
Alinco, Kenwood, SGC, Elecraft 8 pin
screw on
Pin # Connection
1 Microphone audio
2 Push to talk, PTT
3 Direct blue shunt jumper
4 Direct blue shunt jumper
5 Direct blue shunt jumper
6 Direct blue shunt jumper
7 Mic. common (Ground)
8 PTT common (Ground)
Icom 8 pin screw on
Pin # Connection
1 Microphone audio
2 Direct blue shunt jumper
3 Direct blue shunt jumper
4 Direct blue shunt jumper
5 Push to talk, PTT
6 PTT common (Ground)
7 Mic. common (Ground)
8 Direct blue shunt jumper
Yaesu & JRC 8 pin screw on: Common PTT & audio grounds.
Older hand mics, desk mics and Heil mics.
Pin # Connection
1 Direct blue shunt jumper
2 Direct blue shunt jumper
3 Direct blue shunt jumper
4 Direct blue shunt jumper
5 Direct blue shunt jumper
6 Push to talk, PTT
7 PTT and Mic. common
8 Microphone audio
Yaesu & JRC 8 pin screw on: Isolated PTT & audio grounds.
Use the diagram above if you are not sure.
Pin # Connection
1 Direct blue shunt jumper
2 Direct blue shunt jumper
3 Direct blue shunt jumper
4 Direct blue shunt jumper
5 PTT common (Ground)
6 Push to talk, PTT
7 Mic. common (Ground)
8 Microphone audio