Owner`s manual

RIGblaster plus

PTT, KEYING & SWITCHING: Use the supplied DB9M to DB9F

serial cable connected between the RIGblaster’s serial jack and

computer’s com port. If you do not have a RS232 COM port on your

computer then use the USB to DB9 serial adaptor cable. (note the

USB cable requires a driver installation: read manual first)

RECEIVE AUDIO: Use the upplied 3.5mm, 1/8”

stereo phone plug patch cord from radio’s speaker or

line out to computer’s line* input.

MICROPHONE: Use the supplied Mic. cable.

NOTE: Connects to the front only for for RJ45

modular radios.