Owner`s manual

Owner’s Manual
9
Basic station hookup diagram.
TRANSMIT AUDIO: Use the supplied 3.5
mm, 1/8” stereo phone plug patch cord from
computer’s line* output to RIGblaster’s audio in.
* For laptop computers use the computer’s mic. input in
place of the line input and use the headphone output in
place of the line output.
Note: This diagram is a basic sound card station hookup and does not show
a connection for to key CW or for FSK. That connection is user supplied and
requires an 1/8” mini jack to connect the key out of the RIGblaster to the radio’s
straight key input for CW or FSK keying terminals for RTTY
COMPUTER SPEAKER RE-CONNECT: The
cable from a computer speaker re-connects to the
RIGblaster’s audio output.