Owner`s manual

cover. Chamber 1 and 2 are separate chambers but equalize in pressure because they are

inside a fabric cover. Ideally you want to put half of the air in chamber 1 and half in chamber

2. This way if you suddenly lose pressure in one chamber you should have another chamber

as a safety.

3. With the Advanced Frame 1™ tube installed inside the outer skin place the inatable oor

inside the center of the Advanced Frame 1™ with twist valve up.

4. Aach the adjustable backrest to the Advanced Frame 1™ side tubes by fastening buckles.

3.2 Understanding Your Valves

Advanced Elements Advanced Frame 1™ kayak uses the following valves. The Advanced

Elements spring valve has the function and durability of other military type valves and is

compatible with most standard pumps. The lock nut holds the valve in place with the cover for

easy ination. The following gures will have details on how to operate the valves.

NOTE:

Deate - Push-in center stem and

rotate clockwise to the locked position.

Valve stem should be pushed-in.

Inate - Push-in center stem and

rotate counter-clockwise to the locked

position. Valve stem should be pushed out.

Figure 1. Inate/Deate Spring Valve

OPERATING THE “TWIST” VALVES

TWIST TO OPEN / INFLATE / THEN CLOSE

TWIST VALVE

PUMP HOSE

INSERT

Figure 2. Inate/Deate Twist Valve

To begin inating your kayak, you will need a Bellows Foot Pump or a Double Action Hand

Pump. Never use compressors, CO2 or compressed air as they may damage your kayak.