Owner`s manual

Advanced Frame 1™ Inatable Kayak Owner’s Manual

3. ASSEMBLY/INFLATING/DEFLATION INSTRUCTION

The Advanced Frame 1™ Kayak has a rigid frame in the bow and stern that enhances its

performance.

3.1 Assembly

The illustration below shows the general assembly of the kayak. Your kayak comes from the

factory pre-assembled. The only assembly you should need to do is aach the adjustable seat.

INFLATABLE FLOOR

ADVANCEDFRAME

OUTER COVER

BOW RIB

STERN RIB

Step 1

Step 2

Step 3

Step 1

1. Your Advanced Frame 1™ kayak comes from the factory pre-assembled however should you

take it apart you will need to insert the aluminum Bow rib and the Stern Rib into the webbing

slots on the cover of the Advanced Frame 1™ tube (while deated).

2. Place the Advanced Frame 1™ (with Ribs installed), into the Outer Skin, making sure that the

air valve is upright and at the back of the boat, and lined up with the opening on the outer