Assembly Instruction

wood slat storage bench

assembly instructions

Page  of 48794786 - 2/06

A B

C D

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

! Proper assembly of this item requires 2 people.

allen key x

athead screw 9x

bolt 6x

buttonhead screw 4x

PAGE 1
wood slat storage bench assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish. ! Proper assembly of this item requires 2 people.
PAGE 2
wood slat storage bench assembly instructions 1. Fasten bench sides to to back as shown. Tighten bolts (B) using allen key (A). A B 2. Fasten bench sides to to front as shown. Tighten bolts (B) using allen key (A).
PAGE 3
wood slat storage bench assembly instructions 3. Set in bottom tray. 3. Fasten hinges on back into pre-drilled holes in top using flathead screws (C) as shown. Tighten screws with a phillips screwdriver.
PAGE 4
wood slat storage bench assembly instructions 4. Fasten lidstays into pre-drilled holes in top using buttonhead screws (D) as shown. D CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth. To protect finish, avoid the use of chemicals and household cleaners.