Assembly Instruction

teak bath medicine cabinet
assembly instructions
Page 3 of 45582952 - 03.05.08
3. To install the wall bracket (B), align the holes in the wall bracket (B) with the mini anchors (A) that you
installed in step 2. Insert a screw (C) into each of the 3 holes and tighten with screwdriver.
NOTE: Make sure that the wall bracket (B) is mounted like the drawing shows!
Wall
B
C
4. Hang medicine cabinet onto wall bracket (B) by holding the cabinet above the wall bracket (B) and
sliding it down over the wall bracket until it securely hangs on the wall.