Assembly Instruction

teak bath stationary caddy

assembly instructions

Page 1 of 35571823 – 02/08

! Tools required:

! Do not throw away packaging materials until assembly is complete.

! Assemble this item on a soft surface, such as cardboard or carpet, to protect nish.

A B

C D

pole 2x

bolt: ¼” dia by 1 3/8” 2x

handle 1x

allen key 1x

E F

upper rack 2x

cam bolt 2x

G H

lower rack 1x

cam lock 2x

PAGE 1
teak bath stationary caddy assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect finish.
PAGE 2
teak bath stationary caddy assembly instructions 1. Insert cam bolt (G) into pole as shown and tighten using phillips screwdriver. G A 2. Insert handle (B), upper racks (C), and lower rack (D) into posts as shown.
PAGE 3
teak bath stationary caddy assembly instructions 3. Insert cam lock (H) into the hole under the handle as shown. The arrow on the cam lock should point towards the pole. Tighten the cam lock with a phillips screwdriver. 4. Insert the bolt (E) into the hole in lower rack as shown and tighten using the allen key (F). CARE INSTRUCTIONS Hardware may loosen over time. Periodically check that all connections are tight. Wipe with a soft, dry cloth.