: stacked modular bookcase assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish.
: stacked modular bookcase assembly instructions cap panel (1x) tall side panel (6x, 9x if three shelves) short side panel (2x, 4x if three shelves) N bottom panel (2x, 3x if three shelves) cross panel (2x, 3x if three shelves) top panel (1x, 2x if three shelves) foot panel (2x) 7291578/7291560/7299217/7299191/8197121/8196982/8186686/8186678 - 01/07 page 2 of 19
: stacked modular bookcase assembly instructions 1. Assembly begins with the bookcase upside down. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the cap panel as shown. 2. Insert cams (D) into pre-drilled holes in the bottom-side of the cap panel as shown. Tighten with phillips-head screw driver. 3. Set tall side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the tall side panels as shown.
: stacked modular bookcase assembly instructions 4. Insert wooden dowels (F) into pre-drilled holes along the bottom edge of tall side panel as shown. 5. Insert bolts (A) with metal washers (E) through pre-drilled holes in bottom panel and into pre-drilled holes along the bottom edge of the tall side panels as shown.
: stacked modular bookcase assembly instructions 6. Insert wooden dowels (F) into pre-drilled holes along the edge of the cross panel as shown. Align dowels in cross panel with holes in the face of the short side panel and insert.
: stacked modular bookcase assembly instructions 7. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the bottom panel as shown. 8. Insert cams (D) into pre-drilled holes in the bottom-side of the bottom panel as shown. Tighten with phillips-head screw driver. 9. Set short side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the tall side panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions 10. Insert wooden dowels (F) into pre-drilled holes along the bottom edge of short side panel as shown. 11. Insert bolts (A) with metal washers (E) through pre-drilled holes in top panel and into pre-drilled holes along the bottom edge of the short side panels as shown.
: stacked modular bookcase assembly instructions 12. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the top panel as shown. 13. Insert cams (D) into pre-drilled holes in the bottom-side of the top panel as shown. Tighten with phillips-head screw driver. 14. Set tall side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the tall side panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions 15. Insert wooden dowels (F) into pre-drilled holes along the bottom edge of tall side panel as shown. 16. Insert bolts (A) with metal washers (E) through pre-drilled holes in bottom panel and into pre-drilled holes along the bottom edge of the tall side panels as shown.
: stacked modular bookcase assembly instructions IMPORTANT NOTE: IF ASSEMBLING A THREE UNIT HIGH MODULAR BOOKCASE, SKIP STEPS 17-20 ON THIS PAGE AND THE NEXT AND PROCEED TO STEP 21 ON PAGE 12. 17. Insert wooden dowels (F) into pre-drilled holes along the edge of the cross panel as shown. Align dowels in cross panel with holes in the face of the foot panel and insert.
: stacked modular bookcase assembly instructions 18. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the bottom panel as shown. 19. Insert cams (D) into pre-drilled holes in the bottom-side of the bottom panel as shown. Tighten with phillips-head screw driver 20. Set short side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the foot panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions 21. Insert wooden dowels (F) into pre-drilled holes along the edge of the cross panel as shown. Align dowels in cross panel with holes in the face of the short side panel and insert.
: stacked modular bookcase assembly instructions 23. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the bottom panel as shown. 24. Insert cams (D) into pre-drilled holes in the bottom-side of the bottom panel as shown. Tighten with phillips-head screw driver 25. Set short side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the tall side panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions 26. Insert wooden dowels (F) into pre-drilled holes along the bottom edge of short side panel as shown. 27. Insert bolts (A) with metal washers (E) through pre-drilled holes in top panel and into pre-drilled holes along the bottom edge of the short side panels as shown.
: stacked modular bookcase assembly instructions 28. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the top panel as shown. 29. Insert cams (D) into pre-drilled holes in the bottom-side of the top panel as shown. Tighten with phillips-head screw driver. 30. Set tall side panels into place over cams and wooden dowels. Insert cam locks (C) into pre-drilled holes in the tall side panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions 31. Insert wooden dowels (F) into pre-drilled holes along the bottom edge of tall side panel as shown. 32. Insert bolts (A) with metal washers (E) through pre-drilled holes in bottom panel and into pre-drilled holes along the bottom edge of the tall side panels as shown.
: stacked modular bookcase assembly instructions 33. Insert wooden dowels (F) into pre-drilled holes along the edge of the cross panel as shown. Align dowels in cross panel with holes in the face of the foot panel and insert.
: stacked modular bookcase assembly instructions 34. Insert wooden dowels (F) into pre-drilled holes in the bottom-side of the bottom panel as shown. 35. Insert cams (D) into pre-drilled holes in the bottom-side of the bottom panel as shown. Tighten with phillips-head screw driver 36. Set short side panels into place over cams and wooden dowels as shown. Insert cam locks (C) into pre-drilled holes in the foot panels as shown. Tighten with phillips-head screw driver.
: stacked modular bookcase assembly instructions OVER BALANCE. To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the two (2) sets of overbalance protection hardware included with this product. 1. Attach the two mounting brackets horizontally to the top back edge of the furniture. Insert the short screws through the holes in the bracket and tighten securely using screwdriver. 2.
