: rolling storage unit 3x4 assembly instructions ! CAUTION To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the two (2) sets of overbalance protection hardware included with this product.
: rolling storage unit 3x4 assembly instructions ! Tools required: ! Do not throw away packaging materials until assembly is complete. ! Assemble this item on a soft surface, such as cardboard or carpet, to protect the finish. ! Proper assembly of this piece requires two people.
: rolling storage unit 3x4 assembly instructions 1. Place one of the two side panels on its side as shown. 2. Screw cam (B) in holes shown. Tighten with a flat head screwdriver.
: rolling storage unit 3x4 assembly instructions 3. Attach the center shelf to the side panel and insert cam locks (C) into holes on the bottom of the shelf. Tighten with a philip’s head screwdriver.
: rolling storage unit 3x4 assembly instructions 4. Insert dowels on upper and lower shelves into the other holes in the side panel.
: rolling storage unit 3x4 assembly instructions 5. Repeat steps 1 through 4 on one inner panel and attach it to the other side of the three shelves.
: rolling storage unit 3x4 assembly instructions 6. Repeat these steps with the remaining inner panel, side panel and shelves as shown below.
: rolling storage unit 3x4 assembly instructions 7. Attach the bottom panel to the side and inner panels with bolts (A), metal washers (D) and lock washers (E). Tighten with the allen key (G).
: rolling storage unit 3x4 assembly instructions 8. (OPTIONAL) Attach the 5 casters to the bottom panel with screws (F). Place 4 locking casters at corners and 1 non-locking caster in center. Tighten with philips head screwdriver.
: rolling storage unit 3x4 assembly instructions 7. Set the storage unit upright. 8. Using a philips head screwdriver, screw snap-locks (H) into holes on top of side and inner panels.
: rolling storage unit 3x4 assembly instructions 10. Align the holes on the top panel with the snap-lock pegs on the top of the inner and side panels. Ensure fingers and body parts are clear of the connecting pieces. Firmly press down on the top panel until each peg snaps into place. While this is a secure connection for assembly, this item should not be lifted by the top panel for your safety, as it could disengage from the rest of the shelving unit.
: rolling storage unit 3x4 assembly instructions OVER BALANCE. To prevent injury and property damage from unexpected tipping of furniture, we highly recommend installation of the two (2) sets of overbalance protection hardware included with this product. 1. Attach the two mounting brackets horizontally to the top back edge of the furniture. Insert the short screws through the holes in the bracket and tighten securely using screwdriver. 2.
