Assembly Instruction

rolling storage 3x1
assembly instructions
Page 3 of 3
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
Wipe with a soft, dry cloth. To protect  nish, avoid the use of chemicals and household cleaners.
3. Rotate the storage unit to its upright position. Using a phillips head screwdriver, screw snap-locks(E) into
the holes on the top of the side panels. Align the holes on the top panel with the snap-locks on the top of
the side panels. Firmly press down until top panel snaps into place.
???????-08.05.09
4. Insert magic wire (G) into the holes of the side panel and the partition. Then place the shelves into the
cabinet aligning the grooves on each ends of the shelves with the magic wire.
E
5x